Job Search Results

50 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/09/20 Sunday 04:10AM Pacific Time by ContractJobHunter. )

Listings 1 - 50

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog Layout Engineer - Austin, TX

Description:
Analog Layout Engineer - Austin, TX

At Cyient's Semiconductor, IoT, and Analytics (SI&A) business unit, we are proud to work on technology that is transforming how ordinary things work to perform better and provide greater convenience.
Cyient brings more than 20 years of experience in semiconductor and software systems solutions and services. Our strong technical and domain expertise with a robust ecosystem partnership makes us your trusted global semiconductor partner, from concept to production.
With the integration of two key acquired technologies, semiconductor, and digital transformation, into our services, we offer the Industrial Internet of Things (IIoT) industry end-to-end digital solutions. We support embedded intelligence at the edge, connected intelligence in the cloud, and actionable intelligence for the customer.

Job Description
• Familiarity with analog matching requirements and practice of it in layouts is a must
• Expertise on Cadence virtuoso custom/analog layout platform
• Knowledge of layout techniques for device matching, minimize parasitic, high speed routing.
• Working knowledge on various analog IP blocks: PLLs, ADC, DAC, Bandgap ref and other high speed connectivity ckts.
• Good understanding of parasitic RC delay, signal integrity and EM Deep sub-micron CMOS layout experience 16nm and smaller geometries (Will be a + if done work using either 7nm or 5nm).
• Good understanding of layout extractions, verification methods which includes LVS, DRC and ERC checks on leading foundry flows.
• Chip planning and block implementation • Ability to estimate layout schedule for a given circuit, layout planning and provide early feedback to circuit design engineers etc.
• Ability to work with circuit designers that are located remotely which requires the documentation skills and communication skills.
• FinFet experience required

Skills & Experience
Analog Layout, FinFET, Mentor Graphics Calibre, Physical Verification, Virtuoso XL
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-016630
Job Location: Austin, TX
Input Date: 06/29/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Drafter

Description:
CAD Drafter Core Responsibilities

Design and create product based on the approved quote/job contract 
Produce list of materials, fabrication drawings, approved samples, and customer’s field measurements.
Coordinate with fabrication department through all stages of fabrication, finishing, and packaging in order to ensure a finished product conforming to all required specifications.
Draft the shop drawings and following through with any changes required by customer/architect revisions
Responsible for coordination of job with customer throughout all stages of the project, participate on job review meetings, job site visits, field measuring and design implementation.
CAD Drafter Knowledge

Knowledge of manufacturing processes, engineering of architectural systems for commercial and residential structures, architectural and building documentation.
Understanding of industry standard drafting practices for architectural and mechanical drawings.
Hand sketching abilities.
Proficient with CAD software


CAD Drafter Educational/Experience

Associates degree
2+ Years Drafting
2+ Years Previously in Manufacturing Environment 
2+ Years Construction Experience 
Proficiency in AutoCAD or similar software 
 
Job Number: 8794
Job Location: North Haven, CT
Rate: Open
Per Diem: No
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 07/06/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Jeremy Hirsch
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CL - Mechanical Analyst (Computational Fluid Dynamics)

Description:
CL - Mechanical Analyst (Computational Fluid Dynamics)

Job ID # 2020-11460

Contract Opportunity

Location: McLeansville North Carolina

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret Clearance

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 Years

 

What You’ll Do:

Responsible for CFD (Computational Fluid Dynamic) analysis of a hydrodynamic system. 
Collaborate with other mechanical engineers to refine the designs of mission-critical components for sub-sea applications. 
Provide interim feedback to designers on the suitability of designs in fluid flow situations
Provide final evaluation for all designs against mission parameters
 

What You’ll Need:

Ability to Obtain Secret Clearance
Fully proficient with solid modeling CAD tools to create mechanical models and drawings
Fully proficient with technical standards, manufacturing/fabrication methods, and government/industry standards
Creative thinking with the ability to multi-task
Ability to quickly grasp and apply new information
Effectively handle and lead complex assignments
Ability to write technical papers
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Bachelor’s Degree in Mechanical Engineering, a related specialized area or field combined with 5 + years of relevant work experience; or Master’s Degree combined with 3 + Years of relevant work experience
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11460
Job Location: McLeansville, NC
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/25/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Custom Layout Engineer - San Diego, CA (Multiple Locations)

Description:
Custom Layout Engineer - San Diego, CA (Multiple Locations)

At Cyient's Semiconductor, IoT, and Analytics (SI&A) business unit, we are proud to work on technology that is transforming how ordinary things work to perform better and provide greater convenience.
Cyient brings more than 20 years of experience in semiconductor and software systems solutions and services. Our strong technical and domain expertise with a robust ecosystem partnership makes us your trusted global semiconductor partner, from concept to production.
With the integration of two key acquired technologies, semiconductor, and digital transformation, into our services, we offer the Industrial Internet of Things (IIoT) industry end-to-end digital solutions. We support embedded intelligence at the edge, connected intelligence in the cloud, and actionable intelligence for the customer.

Job Description
• Familiarity with analog matching requirements and practice of it in layouts is a must
• Expertise on Cadence virtuoso custom/analog layout platform
• Knowledge of layout techniques for device matching, minimize parasitic, high speed routing.
• Working knowledge on various analog IP blocks: PLLs, ADC, DAC, Bandgap ref and other high speed connectivity ckts.
• Good understanding of parasitic RC delay, signal integrity and EM Deep sub-micron CMOS layout experience 16nm and smaller geometries (Will be a + if done work using either 7nm or 5nm).
• Good understanding of layout extractions, verification methods which includes LVS, DRC and ERC checks on leading foundry flows.
• Chip planning and block implementation • Ability to estimate layout schedule for a given circuit, layout planning and provide early feedback to circuit design engineers etc.
• Ability to work with circuit designers that are located remotely which requires the documentation skills and communication skills.
• FinFet experience required

Skills & Experience
Analog Layout, FinFET, Mentor Graphics Calibre, Physical Verification, Virtuoso XL
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-0166300
Job Location: San Diego, CA
Input Date: 06/29/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Must be comfortable with Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
 
Job Number: 12463
Job Location: Fort Worth, TX
Rate: $65.57/HR
Per Diem: Split Possible
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 07/01/2020
Last Updated: 07/01/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Drafter - Solidworks Electrical

Description:
Electrical Drafter Summary:

Create, develop and recommend changes to electrical parts and functional assemblies utilizing appropriate CAD tool software.

Electrical Drafter Responsibilities:

Use Solidworks design, and drafting systems to prepare engineering drawings, specifications and estimates.
Create electrical drawings for MIL STD requirements.
Work from blueprints, technical directives, technical data and engineering specifications to create aircraft electrical drawings.
Prepare designs or exhibits from general instruction and preliminary sketches, diagrams, schematic, conceptual, or detailed design drawings.
Design/modifying complex and non-routine drawings, aircraft wiring routes and providing creative solutions for installation data packages.
Research and assist engineering personnel in developing and recommending corrections to efforts in modifications or changes to required documentation.
Work with custom programs to create detailed drawings, and when necessary, bills of material to be used in the manufacture and installation of our products.
Confer with Design Team, Engineers, Project Managers and other shop personnel for revising drawings; creating drawings, determine design requirements, modifications, and issues.
Efficiently produce accurate drawings for review and approval by design staff.


Electrical Drafter Preferred:

Knowledge of commonly used concepts, practices and procedures with MIL-STD-31000, Department of Defense, Standard Practice, Technical Data Packages.
Experience fabricating and integrating loose wiring assemblies in military aircraft and able to understand and build up connectors using the proper tools.
Create drawings and data packages to assist with modifications and installations on aircraft and components.
Electrical Drafter Required:

A high school diploma or equivalent is required; Associates Degree strongly desired or completed a technical school, trade school, or advanced armed services technical school curriculum or course of study in CAD certificate program - Solidworks
Must be proficient with Solidworks. Might consider other CAD packages.
Ability to read, interpret electrical, electromechanical, integration and installation schematics and drawings.
Communicate and prioritize duties, requirements and responsibilities precisely and be organized and detailed oriented.
 
Job Number: 8774
Job Location: Hollywood, MD
Rate: 40.00
Per Diem: Possible
Overtime: Possible
Duration: 3-6 mos
Start Date: ASAP
Input Date: 07/01/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Sam Barnes
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer - Contract OHIO

Description:
Analysis
Conduct failure analysis with minimal oversight Perform analysis of products to show compliance to derating guidelines and manufacturers'
specifications. Various CAD/CAE tools may be used for this.

Computer Skills
Basic proficiency with Microsoft Office (Word, Outlook, Excel, PowerPoint) Operate computer-assisted engineering and design software and equipment to perform basic engineering tasks.
Design

Investigate and test vendors' components, perform design selection Modify existing designs for new applications Create documentation of design / product with minimal oversight – drawings, specifications, compliance matrices, test plans and test reports
 
Job Number: 12680
Job Location: Cincinnati, OH
Rate: 40/45 hr.
Per Diem: Split
Overtime: Possible
Duration: 12 Months
Start Date: 2/3 wks from offer
Input Date: 05/14/2020
Last Updated: 07/30/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer ( Clearfield, Utah ) S9758059

Description:
Engineer ( Clearfield, Utah ) S9758059
6 month contract

Pay rate: Open

As a Engineer, you will create flat patterns and laser projection data to support manufacturing of complex composite structures. Work will be accomplished using NX CAD and Siemens FiberSIM applications.

• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE with last investigation within the last 4.5 years!

Requirements & Qualifications:
• Greater than 2 years related work experience
• Working knowledge of NX CAD
• Working knowledge of Siemens FiberSIM
• Prepare solid model or complex geometry
• Perform blue print reading
• Troubleshooting manufacturing processes
• Windows and MS office skills required

Preferred Skills and Experience:
• Bachelor’s degree in Engineering
• CAD Automation, programming, script writing
• Laser Projection Experience (Virtek LaserEdge preferred)
• Aerospace or manufacturing experience
• Familiarity with composites
 
Job Number: S9758059
Job Location: Clearfield, UT
Rate: Open
Per Diem: No
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 07/12/2020
Last Updated: 07/26/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

IT Generalist - Systems and Network Administrator

Description:
The systems and network administrator is responsible for managing the IT infrastructure including AWS/cloud servers, on-premise servers, workstations, laptops, and network gear. Day-to-day responsibilities include backups, reviewing logs, setting up and disabling user accounts, managing the firewall(s), managing software licenses, working with service providers, and troubleshooting IT issues. The administrator will specify and set up servers, desktops/laptops, network equipment, phones, and physical access control systems. The administrator will assist the Avionics, GNC, and Flight Software teams with RTOS deployment and test and flight system setup and management. The administrator will assist the mission operations center lead in specifying and setting up the mission operations center. The administrator will work with the CTO to modify and implement IT policies. The administrator will work with the CTO, NASA, and DoD to manage and implement Security Policy.
Required Skills/Experience:
  • Mission-critical IT systems (such as datacenter, telco, call center, business website, etc.)
  • Linux, Windows 10, Windows Server products
  • Python, Powershell, shell scripting (bourne/bash or csh)
  • Firewall rules, TCP/IP, WiFi, Ethernet, Routing

Desired Skills/Experience:

  • Google apps administration
  • Real time OS (VxWorks, RTEMS, etc.)
  • C/C++, Matlab
  • CAD/CAM/CAE support
  • PDM/PLM support
  • GitLab support
  • FortiNet FortiGate firewall
  • Managed switches/multi-layer switches
  • HPC
  • NAS
  • SAN
  • NIST Cybersecurity Framework, NIST SP800-171

Required skills/personal traits:

  • Critical thinking
  • Troubleshooting
  • Self managed, self starter

Self learner

 
Job Number: 2010115016
Job Location: Mojave, CA
Duration: 36 months
Input Date: 07/01/2020
Last Updated: 09/18/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003Ot7PQAS&URLSource=cjhunter

Jr. Mechanical Engineer

Description:
Interprets customer specifications to define requirements for mechanical designs.
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Designs mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical components, standards and mechanical best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly failures.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Performs thermal and structural analyses and generates analysis reports.
• Generates engineering design change orders and reviews the work of peers.


• In persuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology.
• 0-3 years experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4110
Job Location: Northwest, MA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 09/09/2020
Last Updated: 09/18/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: brao@advancedtechno.com
Website: www.advancedtechno.com

Machine Programmer-Brake Press/Laser

Description:
Write programs or nesting for various fabrication machines including Brake Press, Laser, etc. Inform appropriate personnel of mistakes on or clarifications required on drawings or routing changes for process improvements.
 Essential Job Functions:
·Create programs and nesting daily for miscellaneous fabricating machines by material type per the MRP schedule.
·Ability to make process and productivity improvements while performing duties.
·Ensure downstream operations have required parts when required.
·Needs to have an understanding of basic laser and operation and brake press operation.
·Ability to read and interpret blueprints and weld symbols.
·Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
·Ability to add, subtract, multiply, and divide in all unites of measure, using whole number, common fractions, and decimals and ability to compute rate, ratio, and percent.
·Ability to understanding to carry out instructions furnished in written, oral or diagram form.
·Ability to deal with problems involving several concrete variables in standardized situations.
·Review job order, CAD drawings, or specs, understand tool paths, and analyze data for calculations/critical paths.
 
Previous experience working with or programming brake press and laser.
Knowledge of database software; inventory software; manufacturing software; and spreadsheet software.
Use of the AS400 computer system
Use of Auto CAD or Solidworks.
1st shift position

 
Job Number: 2010113589
Job Location: Clintonville, WI
Duration: 6 months
Input Date: 04/14/2020
Last Updated: 09/18/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Tyler Belisle
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003On27QAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Job Description:
1. Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
2. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Qualifications:
1. Familiarity with aerospace design practices including designing for light weight design and random vibration environments; working knowledge of geometric dimensioning and tolerance analysis; modeling and drawing creation in Creo/Pro-Engineer.
2. Experience with UTAS designed hardware on the Orion, ESOC and Space Station programs is a plus.
3. Experience with answering Mechanical Design verifications a discriminator.
4. Concept model creation in CREO.
5. Development and Production Drawing Creation in CREO.
6. Marking prints for engineering changes.
7. Do stress analysis modeling and determine structural adequacy as required.
8. Create or modify existing Mechanical Design Verification analysis and memos.

Education:
1. Bachelor’s Degree.
2. 5+ years of related experience.
 
Job Number: 12478
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 07/07/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer ( Goleta, CA ) 10042216J J10021712

Description:
Mechanical Design Engineer ( Goleta, CA ) 10042216J J10021712J

12 + Month Contract

Pay rate: $40 - 75 /hr W2, depending on experience, multiple openings.

1.) 3D modeling CAD experience preferably CREO
2.) Experience in Space Deployables or Mechanisms Highly Desirable
3.) Ability to work independently with minimal supervision.

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Qualifications
• Bachelor of Science in Engineering
(Mechanical, Astronautical, or Aerospace)
• 0-3 years of experience in mechanical design

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership.
• Must be self-motivated with excellent technical communication skills.
• Ability to work independently as well as in an integrated team and adapt to change and dynamic requirements.
• Strong communication and analytical skills and discipline with the ability to organize and prioritize job assignments and tasks.
• ITAR Requirements: To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Number: 10042216J J10021712
Job Location: Goleta, Ca
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/07/2020
Last Updated: 06/25/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Mechanisms

Description:
The Engineer will be designing mechanisms, rotor hubs, actuators, gear boxes, drive systems, etc. All of the design work will revolve around moving parts and mechanisms. This person must also have lead experience and be comfortable in a lead role.

Seeking an experienced design engineer to take ownership of structural analysis of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes rotor blade retention components, mechanical control systems, electro-mechanical actuators, transmissions, and electric motors/shafting. Define key requirements and take ownership of them through the design life-cycle.
Do: The Mechanical Design Engineer will also take the lead designing a myriad of critical components and primary structure. Areas of focus include propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include the relevant design artifacts (specifications, interface drawings, layout drawings, datum files and CAD assemblies, tolerance stack-ups, detailed drawings, etc). The ideal candidate will be highly versed in 3D CAD (Dassault 3DExperience preferred) and will also be responsible for conducting sizing of the components he or she develops. This will require working knowledge of aerospace sizing methodologies and experience running finite element models. In addition, the role will require the mechanical design engineer to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Bachelor’s degree from an accredited university in mechanical/aerospace engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one); or master’s degree from an accredited university and at least 3 years of professional experience or equivalent experience/combined education.
• Excellent mechanical aptitude and analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Highly experienced in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar and generating detailed drawings, which are in accordance with ASME Y14.5-2009 standards.
• Familiar with finite element analytical tools such as Hyper-Mesh pre-processors integrated with Optistruct or Nastran, ANSYS or similar.
• Deep knowledge of common aerospace materials and standard hardware selection is a must. Experience with light weight structures and composites is also highly advantageous.
• Experience designing critical structural components, which have been sized for static strength, stiffness, fatigue, or a combination thereof. Knowledge of kinematics is also desired.
• Experience supporting ground and flight testing of complex systems as well as running sub-scale proof of concept testing such as coupon programs or prototype test rigs.
• Versed in gear and bearing design as well as lubrication systems, and the design of common housing features such as lugs and bolted joints.
• Familiarity with component and sub-system FAA certification testing is a plus.
• Past experience as a design supervisor, or leading a team and/or mentoring others, formally or informally is an advantage.



The Structures Company is an AA/EOE.
 
Job Number: 400
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/12/2020
Last Updated: 07/15/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer -NX

Description:
Mechanical Engineer

Summary of Job Description:

The Mechanical Engineer will be working under the direction of the Sr Project Engineer, the Mechanical Design Engineer will create 3-D CAD models and assemblies in support of proper design at the component or subsystem level. The Mechanical Design Engineer will also work collaboratively with other engineers and designers the design and development of vehicle transportation systems for Military applications.

Job Requirements:

New Product Design Experience
Experience with design of vehicle suspension systems
Experience with steering axles and Trunnion Suspension experience are a bonus
Siemens NX Solid Modeling experience
Ansys Mechanical APDL(structural analysis)
Experience developing vehicle transport systems a plus
BOM generation
Familiar in product development utilizing weldments fabrication, sheet metal fabrication and Bolted Joints
Job Requirements:

Positions is based in Florence KY
 
Job Number: 8678
Job Location: Florence, KY
Start Date: asap
Input Date: 06/24/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Kathy Beattie
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Sub-Systems Engineer – Long term, direct hire

Description:
Andromeda Systems Incorporated (ASI) is seeking full-time experienced mechanical systems engineers to support DoD aircraft platforms. The engineers will assist in the design, execution, and troubleshooting of mechanical systems and modifications on a variety of DoD aircraft platforms. These positions are located in the Jacksonville, FL area.

Engineers at ASI work in a great environment which includes:
• Compressed and flexible work schedules
• Ability to work from home
• Diverse projects supporting multiple platforms
• Fantastic co-workers and customers
• Hands-on assignments that don’t happen behind a desk

Some of the advantages of working with ASI in Jacksonville include:
• Low cost of housing
• No state income tax
• Great area schools (St. John’s County)
• Miles of sunny beaches

Responsibilities:
• Develop detailed solutions for technical, operational, and maintenance problems
• Assist maintenance in troubleshooting:
- the rigging of aircraft control systems
- aircraft hydraulic repairs and malfunctions
- aircraft fire detection and suppression system repairs and malfunctions
- aircraft fuel system repairs and malfunctions
- aircraft pressurization system repairs and malfunctions
• Present to management or team
• Ensure repairs are compliant with approved naval aviation maintenance policies
• Perform engineering investigations of failed aircraft components and systems
• Provide disposition for obsolete aircraft system components
• Determine criticality of aircraft system components by performing failure mode effects and criticality analysis
• Review technical publication deficiency reports and update publications where necessary
• Ensure aircraft operates properly and safely
• Draw and read blueprints and give material estimates and time required for repairs
• Determine airworthiness of aircraft
• Apply engineering principles to investigate, analyze, plan, develop, implement, test, and evaluate projects within the mechanical engineering discipline
• Review and prepare engineering and technical analyses, reports, and other technical documentation
• Up to 10% travel may be required

Required Qualifications:
• Bachelor’s degree in Aerospace, Aerodynamics, Mechanical or Electrical Engineering from an accredited college or university
• At least 3 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Familiarity with the troubleshooting and integration of test equipment, electrical/power, air conditioning, cabin pressure, hydraulics, and mechanical systems in aircraft
• Experience in reading, creating, and editing drawings in AutoCAD (or similar CAD program) and work instructions in Microsoft Office and Adobe Acrobat products
• Experience in prototyping and validating installations
• Ability to use Microsoft Office Suite (Excel, Word, Outlook, PowerPoint)
• Effective communication and interpersonal skills

Preferred Qualifications:
• 5-10 years of mechanical systems engineering work experience within the aviation, aerospace, or defense industry
• Self-motivator capable of working through problems on own

Work Authorization/Security Clearance:
• Must be a U.S. Citizen and qualify for Secret Clearance
 
Job Number: 513
Job Location: Orange Park, FL
Rate: DOE
Per Diem: No
Overtime: Available
Duration: Long Term
Start Date: Available Now
Input Date: 07/27/2020
Firm Name: ANDROMEDA SYSTEMS INC
Attention: Stephanie Danti
Address: 330 CROSSING BLVD
City, State: ORANGE PARK, FL 32073
Phone: 904/402-8673
Website: www.androsysinc.com

NC Programmer

Description:

PDS Tech is looking for a Numerical Control Programmer for a position in St. Louis, MO


Actively collecting and screening resumes for upcoming needs. 

  • To define, plan, design and refine fixtures, data and processes necessary to facilitate and control the manufacture of products in the St. Louis facilities.
  • Plans, creates, verifies and revises machine control data and documentation that direct the operation for multi-axis numerically controlled machines and robots required to manufacture and inspect complex parts and tools.
  • Provides numerical control, machining and programming technical expertise to cross-functional engineering and manufacturing team.
  • Establishes technical requirements for manufacturing and producibility. 
  • Defines and designs complex fixtures used to manufacture or inspect parts. 
  • Plans, guides and facilitates the development and integration of new machining techniques and manufacturing methods or inspection techniques, processes and software.
  • Continuously improves the quality of manufacturing processes and supplier-provided work


 


 Experience and Qualifications: 
  • Minimum of 4 years recent NC Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
  • Aerospace manufacturing experience is required. 
  • Significant CATIA V5 experience is required.
  • 3, 4, and 5 axis experience 
  • Familiarity with Windows environments and office tools.
  • Machinist experience preferred.
  • Familiarity with Vericut preferred

 Education:

  • Bachelor’s Degree or Associates Degree in Manufacturing Technology or related field is preferred.  Combination of education and experience will be considered in lieu of degree.

Physical Demands:

  • Frequently required to spend long hours sitting at a work stations and using office equipment. 
  • May be required to walk or stand for brief periods
  • May be required to use stairs when elevator is not available
  • May occasionally lift, carry, push, pull or otherwise move up to 25 pounds of office supplies and materials 
  • May be required to reach with arms and hands and to stoop, kneel or crouch

Please send resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 2010112352
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 04/24/2020
Last Updated: 09/18/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fmjeQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD Speclalist

Description:
NX CAD specialist to release models for a transportation company developing an electromagnetically levitated pod through a low pressure tube.
NX is a must.
Experience in completing mechanical layout and 3D routing for fluid lines and associated clamps and brackets is the primary need. Prior experience designing and procuring brackets and mounting features a plus.
 
Job Number: 2010115757
Job Location: Los Angeles, CA
Per Diem: split
Overtime: possible
Duration: 6 mos
Start Date: asap
Input Date: 06/26/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD Speclalist

Description:
NX CAD specialist to release models for a transportation company developing an electromagnetically levitated pod through a low pressure tube.
NX is a must.
Experience in completing mechanical layout and 3D routing for fluid lines and associated clamps and brackets is the primary need. Prior experience designing and procuring brackets and mounting features a plus.
 
Job Number: 2010115757
Job Location: Los Angeles, CA
Per Diem: split
Overtime: possible
Duration: 6 mos
Start Date: asap
Input Date: 06/26/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Website: www.pdstech.com

Power Supply Design Engineer

Description:

Design and develop AC to DC and DC to DC power supplies for military applications. Must be proficient in the design principles of switchmode power conversion, feedback loop compensation, magnetic design, EMI considerations. BSEE with 5 years of design experience preferred. CAD and PCB layout experience a plus.

Magnetics Design experience required

Exp with design of 1&3 phase power transformers for military applications, including prototype, electrical, test, packaging and drafting highly desired

Here are the key points that the test is intended to identify in candidate’s experience:



  • DC DC Circuit Design
  • Magnetics Design


 



 
Job Number: 2010113696
Job Location: Sun Valley, CA
Duration: 12 months
Input Date: 04/17/2020
Last Updated: 09/18/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Anna Ashcraft
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003OnMbQAK&URLSource=cjhunter

Principal Microelectronics CAD Administrator

Description:

 
PDS Tech, Inc. is seeking a Principal Microelectronics CAD Administrator in Baltimore / Linthicum Heights, MD.
 
  • Administer Configuration Management
  • Provide design team basic scripting capabilities in
    • SKILL,
    • Python,
    • PERL,
    • Ocean,
    • Linux Shell

  • Interface with CAD tool vendors to solve bugs, usability issues


 
Requirements
  • U.S. Citizenship 


  • Bachelor's degree in a technical area (BSEE or other Engineering discipline preferred) with at least 5 years of relevant experience (or technical MS with 3 years)
  • Will consider candidates with >8 years of experience at higher grade levels

 
Job Number: 1910109284
Job Location: Linthicum Heights, MD
Duration: 12 months
Input Date: 11/20/2019
Last Updated: 09/18/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fWJfQAM&URLSource=cjhunter

Principle Analog Mixed Signal IC Designer

Description:
PDS Tech Inc. is seeking a Principal Analog Mixed Signal IC Designer in Baltimore / Linthicum Heights, MD.
 
  • Bachelor's degree in a technical area with 5 years of experience in Analog/Mixed Signal Circuit design (3 years with technical MS or 0 years with a PhD) 
  • Experience with some of the following:
    • IC custom design tools (e.g. Cadence or Mentor) for schematic capture, circuit simulation, and full custom layout;
    • mixed-signal circuit design experience (Digital and Analog);
    • physical verification utilizing Cadence Assura or Mentor Calibre. 


 
This is not a layout engineer position.  Candidate must have experience designing circuits starting with schematic entry and simulation. 
 
 

 
Job Number: 1910107901
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 10/18/2019
Last Updated: 09/18/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP4oQAE&URLSource=cjhunter

Product Support Engineer

Description:
• Applies the Autodesk Inventor 3D CAD system to create mechanical layouts and drawings.
• Modifies mechanical and electromechanical assemblies using design for manufacturing (DFM), design for assembly (DFA) principles.
• Develops detailed fabrication and assembly drawings, performs tolerances analysis, design studies and trade studies.
• Specifies mechanical standards and best practices.
• Troubleshoots and resolves mechanical manufacturing and assembly issues.
• Support testing, installation, operation, maintenance and repair of electromechanical equipment.
• Generates project cost estimates and maintains project budgets and schedule.
• Generates engineering design change orders • Generates engineering Bills of Materials (BOMs) • Uses established and well defined engineering procedures.
• Able to work simultaneously on a variety of projects.

• In pursuit of a Bachelor of Science degree in Mechanical Engineering or Mechanical Engineering Technology • 0-3 years of experience in mechanical engineering design of electromechanical equipment and systems.
• Practical experience with computer aided design and analysis software tools.
• Good communication skills
• Completed statics/dynamics, vibration and fluid dynamics course work.
 
Job Number: B4111
Job Location: Northwest, MA
Rate: $29-$40
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: 6/22/2020
Input Date: 06/17/2020
Last Updated: 09/18/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Brittany
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: brao@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RFIC Layout Senior Engineer – San Diego, CA / Cupertino, CA

Description:
RFIC Layout Senior Engineer – San Diego, CA / Cupertino, CA – JR-017485


At Cyient's Semiconductor, IoT, and Analytics (SI&A) business unit, we are proud to work on technology that is transforming how ordinary things work to perform better and provide greater convenience.

Cyient brings more than 20 years of experience in semiconductor and software systems solutions and services. Our strong technical and domain expertise with a robust ecosystem partnership makes us your trusted global semiconductor partner, from concept to production.

With the integration of two key acquired technologies, semiconductor, and digital transformation, into our services, we offer the Industrial Internet of Things (IIoT) industry end-to-end digital solutions. We support embedded intelligence at the edge, connected intelligence in the cloud, and actionable intelligence for the customer.

Job Description

In this role, you will work closely with the RFIC design team to layout and verify custom RF and analog IP for complex SoC products.


Key Qualifications:
Experience in custom RF/analog layout with extensive knowledge of deep sub-micron CMOS (40nm, 28nm, FinFet, etc.)
Knowledgeable in layout techniques for device matching, minimizing parasitics, RF shielding, and high frequency routing
Must have experience in 7nm or less
Solid understanding of RC delay, electro migration, and coupling
Understanding of guard rings, DNW, PN junctions, and advanced process effects such as LOD, WPE, etc.
High level proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc.
Knowledge of CADENCE layout tools
As an RF Engineer, you will be responsible for:
Detailed transistor-level layout of RF and analog circuit blocks including LNA, mixers, PLL, LO generation, modulators, power amplifiers, ADC/DAC, baseband filters, and bandgap/bias/LDO.
Block level and top-level layout through full verification flow including extraction, DRC, LVS, and DFM checking
Co-work with designers on block level and top-level floorplanning
Layout review for power/gnd routing, electromigration, signal path check, differential and IQ matching, and signal coupling

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-017485
Job Location: San Diego, CA
Input Date: 06/29/2020
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Aerodynamicist

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop a highly efficient vehicle design through aerodynamic analysis that is aligned with industry best-practices. This role will have a major role in running all aerodynamic analysis and guiding the design through optimization to produce a compelling end solution.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The aerodynamicist will take the lead analyzing a myriad of external geometries and control surfaces. Areas of focus include blades, wings and fuselage. The core output will be high quality CFD solutions and the resulting CAD surface definitions that can be delivered to the design team to produce Class-A surfaces. Star-CCM and similar CFD tools will be used in support of the design. The aerodynamicist will leverage these to the fullest extent possible to produce valid, high integrity outputs. It is also desired for the candidate to automate these tools to iterate design permutations in a very rapid manner. Therefore, some limited experience with scripting tools such as Matlab, C++, and Python as well as general familiarity with high power computing clusters to manage the job queues will be needed. In certain instances, coupled solution may be required, which would entail working knowledge of structural dynamics and control theory in addition to an expert understanding of the aerodynamic discipline. In addition, it will be necessary for the aerodynamicist to generate custom lifting line tools or similar to help assist in preliminary sizing and basic conceptual development.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in Aeronautical, Aerospace engineering, or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. Formula One); or PhD and 3 years of equivalent experience/combined education. Prior rotorcraft development experience is a plus.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in computational fluid dynamics tools such as Star-CCM (preferred), Overflow and ANSYS-Fluent or similar.
• Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar is also ideal.
• Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or MatLab.
• Well versed in airfoil selection and optimization of custom airfoils through XFoil and other tools is also desired.
• Experience developing control laws with an understanding of vehicle flight dynamics design and analysis with MatLab-Simulink is also advantageous.
• Experience supporting correlating model outputs to actual data produced via wind tunnel and flight test runs. Prior experience with experimental methods and wind tunnel testing is also a plus.
• The job entails using finite volume software and classical analysis to help define aerosurfaces along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.
 
Job Number: t3260
Job Location: Southern, CA
Rate: $70-$90/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 05/08/2020
Last Updated: 07/17/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Senior Principal Analog Mixed Signal IC Designer

Description:
PDS Tech Inc. is seeking a Senior Principal Analog Mixed Signal IC Designer in Baltimore / Linthicum Heights, MD.
 
  • Bachelor's degree in a technical area with 9 years of experience in Analog/Mixed Signal Circuit design (7 years with technical MS or 4 years with a PhD) 
  • Experience with some of the following:
    • IC custom design tools (e.g. Cadence or Mentor) for schematic capture, circuit simulation, and full custom layout;
    • mixed-signal circuit design experience (Digital and Analog);
    • physical verification utilizing Cadence Assura or Mentor Calibre. 


 
This is not a layout engineer position.  Candidate must have experience designing circuits starting with schematic entry and simulation. 
 

  
  
 

 
Job Number: 1910107904
Job Location: Baltimore, MD
Duration: 0 months
Input Date: 10/18/2019
Last Updated: 09/18/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fP53QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Quality Inspector

Description:
Senior Quality Inspector

Job ID # 2020-11447

Contract Opportunity

Location: Taunton Massachusetts

Industry: Aerospace & Defense

Minimum Education: High School Diploma/GED

Minimum Experience: 2 Years

 

What You’ll Do:

Inspect parts and materials for compliance to specified requirements and perform real-time defect evaluation.

Preparation of QA documentation along with the verification of corrective action implementation and rework.

Strong communication skills to interface with coworkers and internal customers.



What You’ll Need:

Minimum of 2 years directly related experience
J-STD_001, 002, IPC 610, MIL-STD-883, MIL-STD-750 and X-Ray qualification certifications may be required
Distinct knowledge of material requirements, fabrication techniques, and manufacturability concepts
Experienced in the use of current strategic CAD tools; Pro-E/Creo or Solid Works preferred
Superior knowledge of the strategic CAD and file management tools and design documentation standards (e.g ASME Y14.5M, Geometric Dimensioning & Tolerancing)
Solid understanding of simple mechanical stress; structural, thermal and tolerance analysis
Team player who thrives in collaborative environments and revels in team success
Exceptional problem-solving and communication skills
Open to new ideas and serve as a champion for change when directed from management
Commitment to ongoing professional development
 

*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

High School Diploma/ GED; or Associate’s degree in Electronics, Computer Science, Mechanical Engineering is preferred.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: Job ID # 2020-11447
Job Location: Taunton, MA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12 Months
Input Date: 06/23/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Brentley Sisk
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Aerodynamicist

Description:
Seeking an aerodynamicist to take ownership of the analysis of several key projects. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop a highly efficient vehicle design through aerodynamic analysis that is aligned with industry best-practices. This role will have a major role in running all aerodynamic analysis and guiding the design through optimization to produce a compelling end solution.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The aerodynamicist will take the lead analyzing a myriad of external geometries and control surfaces. Areas of focus include blades, wings and fuselage. The core output will be high quality CFD solutions and the resulting CAD surface definitions that can be delivered to the design team to produce Class-A surfaces. Star-CCM and similar CFD tools will be used in support of the design. The aerodynamicist will leverage these to the fullest extent possible to produce valid, high integrity outputs. It is also desired for the candidate to automate these tools to iterate design permutations in a very rapid manner. Therefore, some limited experience with scripting tools such as Matlab, C++, and Python as well as general familiarity with high power computing clusters to manage the job queues will be needed. In certain instances, coupled solution may be required, which would entail working knowledge of structural dynamics and control theory in addition to an expert understanding of the aerodynamic discipline. In addition, it will be necessary for the aerodynamicist to generate custom lifting line tools or similar to help assist in preliminary sizing and basic conceptual development.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in Aeronautical, Aerospace engineering, or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. Formula One); or PhD and 3 years of equivalent experience/combined education. Prior rotorcraft development experience is a plus.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in computational fluid dynamics tools such as Star-CCM (preferred), Overflow and ANSYS-Fluent or similar.
• Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar is also ideal.
• Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or MatLab.
• Well versed in airfoil selection and optimization of custom airfoils through XFoil and other tools is also desired.
• Experience developing control laws with an understanding of vehicle flight dynamics design and analysis with MatLab-Simulink is also advantageous.
• Experience supporting correlating model outputs to actual data produced via wind tunnel and flight test runs. Prior experience with experimental methods and wind tunnel testing is also a plus.
• The job entails using finite volume software and classical analysis to help define aerosurfaces along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.




The Structures Company is an AA/EOE.
 
Job Number: 398
Job Location: Southern, CA
Rate: $70-$90/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/15/2020
Last Updated: 07/17/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Structural Analyst

Description:
Seeking a leader to take ownership of structural analysis of several key projects. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop structural analysis methodologies that are aligned with industry best-practices and compliance with FAR civil certification standards. Define coupon test programs to establish material allowables and be highly versed in aerospace sizing methods and fatigue methodology.
Lead: Oversee the structural analysis capabilities of a small team and help empower new engineers with best in-class analysis techniques.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The senior structural analysis will also take the lead analyzing a myriad of critical components and primary structure. This includes both metallics and composites. Areas of focus include blades, propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include structural substantiation packages written to a high level of expertise as well as documentation of flight test limits for the analyzed components. This job may also require the senior structural analysis to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one) or equivalent experience/combined education.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in finite element analytical tools such as Hyper-Mesh pre-processors integrated with Nastran solvers (preferred), ANSYS or similar.
• Well versed in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar.
• Knowledge of fatigue analysis of critical structures using various substantiation methodologies (safe-life, flaw tolerant safe-life, damage tolerance among others) through the full-lifecycle. This includes developing and enforcing component strength limits in order to ensure the structural integrity of the component is maintained through the test and evaluation stages of the program.
• Experience supporting ground and flight testing of complex systems.
• Versed in gear and bearing design, and analysis of these components using tools such as Calyx and Romax. Experience designing and analyzing common housing features such as lugs and bolted joints.
• In addition to structural work, thermal, fluid, and dynamic analysis may be called for.
• The job entails using finite element software and classical analysis to help size dynamic components and select material specifications, along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.
• Also desired are candidates with prior experience preparing certification documents for the FAA and direct interaction with a FAA Structural DER.

The Structures Company is an AA/EOE.
 
Job Number: 397
Job Location: Southern, CA
Rate: $60-$75/Hr. **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/15/2020
Last Updated: 07/17/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Structures & SystemsTest Engineer

Description:
Seeking an experienced structures & systems test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Must have experience with:
• Mechanical systems, specifically pneumatic valves.
• RTCA – DO-160
• Vibration & thermal testing
• Functional testing
• Knowledge of test procedures
• Acceptance testing
• Data analysis
• Thermocouples
• CAD drawings – CATIA V5
• FEMAP and NASTRAN
• LabView
• SolidWorks
• Must be able to write reports


Your Mission:
• Design tests plans and equipment for validation of complex mechanical or structural components and systems.
• Write test plans and procedures to define and support execution of tests.
• Interface with internal customers on integrated program teams to establish and verify specific test requirements.
• Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
• Analyze test data to verify test requirements and write test reports to document test results.
• Interface with external test laboratories to facilitate testing for design and analysis teams.
• Participate in the test engineering review, approval and release process.
• Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.


What you bring:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
• 4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
• CAD modelling experience – Experience with Catia V5 preferred
• Experience with simulation and finite element analysis preferred – NASTRAN, Femap
• Experience with DO-160 environmental test standards for mechanical systems
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Focus on safety and reliability in testing.
• Results oriented approach to completing test activities successfully.
• Excellent verbal and written communication skills
• Excellent Organizational Skills and problem-solving skills
• Strong team player.
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S.

The Structures Company is an AA/EOE.
 
Job Number: 290
Job Location: CA
Rate: $70-$75/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 09/05/2020
Last Updated: 09/19/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Back to Advanced Job Search